Achieve the highly desirable wet look appearance on any type of exterior concrete surface with this high gloss acrylic concrete sealer.
Sparkl-Seal is a premium acrylic sealer for decorative concrete that enhances surface colors with a glossy sheen while offering UV and wear protection. Sparkl-Seal penetrates and fills hairline micro cracks, increasing the integral strength of surfaces and creating a tough, non-yellowing acrylic coating over the surface that prevents spalling and freeze/thaw damage. Finally, the abrasion-resistant film also protects surfaces from absorption and damage from water, dirt, food, deicing salts, oil and grease.
Solvent-based, Spark-Seal creates a high gloss finish that gives treated concrete surfaces a desirable ‘wet’ sheen. In contrast, water-based Sparkl-Seal E offers a medium gloss finish for those who prefer a matte look. Each Sparkl-Seal is designed to resist yellowing, so as to ensure treated surfaces retain their ideal sheen. The solvent-based formulations also contain UV inhibitors for added protection.
Sparkl-Seal complies with ASTM C 309, Type 1, Class A & B; ASTM C 1315, Type 1, Class A & B; and, AASHTO M 148, Type 1, Class B.
Sparkl-Seal E complies with ASTM C 309, Type 1, Class A & B and AASHTO M 148, Type 1, Class B
Product Coverage Calculator
Application rates vary with substrate conditions. Suggested application rate for sealing is 300 sf/gal (7.4 sm/L) per application. Best results are obtained when only one or two light coats are applied.
1 Unit = 5 gal pail
Need: 1.3 units
Total Cost: $50.72 (2 units)